ZRC6-DHD360 impactor technical parameters
|
Total length
(Excluding drill bit)
|
Total weight
(Excluding drill bit)
|
Outer diameter of impactor
|
Can be equipped with drill shank
|
Drilling range
|
Rear connector thread
|
1392mm
|
105Kg
|
φ136mm
|
Cop64(DHD360)
|
φ155~φ190
|
API(3 1/2)″REG
API(2 3/8)″IF
|
Available working wind pressure
|
At 1.7MPa
Impact frequency
|
Recommended speed
|
Air consumption
|
1.0MPa
|
1.8MPa
|
2.4MPa
|
1.0~2.5MPa
|
23HZ
|
20~30r/min
|
10m3/min
|
22m3/min
|
28m3/min
|
Characteristics of ZRC6-DHD360 impactor
|
1. It is mainly used in ground sources, water well markets and mines that require drilling operations of more than 150mm.
|
2. Use valveless gas distribution, reliable gas distribution;
|
3. The internal structure is simple and not easy to damage;
|
4. Low air consumption, wind and oil saving, fast drilling speed;
|
5. The internal structure is simple and reasonable, and the maintenance is convenient; the parts have good consistency, high reliability, low overall failure rate, low disassembly frequency, long impact life, and low use cost.
|